summary v ceo =15v; r sat = 45m ;i c = 4.5a description packaged in the innovative 3mm x 2mm mlp (micro leaded package) outline, these new 4 th generation low saturation dual transistors offer extremely low on state losses making them ideal for use in dc-dc circuits and various driving and power management functions. additionally users gain several other key benefits: performance capability equivalent to much larger packages improved circuit efficiency & power levels pcb area and device placement savings lower package height (nom. 0.9mm) reduced component count features ? low equivalent on resistance ? extremely low saturation voltage (100mv @1a) ? h fe characterised up to 12a ? i c = 4.5a continuous collector current ? 3mm x 2mm mlp applications ? dc - dc converters (fet drivers) ? charging circuits ? power switches ? motor control ordering information device marking daa zxtdam832 issue 1 - june 2002 1 mpps? miniature package power solutions dual 15v npn low saturation switching transistor device reel tape width quantity per reel ZXTDAM832TA 7 8mm 3000 zxtdam832tc 13 8mm 10000 b2 c2 e2 b1 c1 e1 3mm x 2mm mlp underside view pinout 3mm x 2mm (dual die) mlp obsolete - please use zxtd617mc
zxtdam832 issue 1 - june 2002 2 parameter symbol value unit junction to ambient (a)(f) r ja 83.3 c/w junction to ambient (b)(f) r ja 51 c/w junction to ambient (c)(f) r ja 125 c/w junction to ambient (d)(f) r ja 111 c/w junction to ambient (d)(g) r ja 73.5 c/w junction to ambient (e)(g) r ja 41.7 c/w thermal resistance notes (a) for a dual device surface mounted on 8 sq cm single sided 2oz copper on fr4 pcb, in still air conditions with all exposed pads attached . the copper area is split down the centre line into two separate areas with one half connected to each half of the dual device. (b) measured at t<5 secs for a dual device surface mounted on 8 sq cm single sided 2oz copper on fr4 pcb, in still air conditions with all exposed pads attached. the copper area is split down the centre line into two separate areas with one half connected to each half of the dual device. (c) for a dual device surface mounted on 8 sq cm single sided 2oz copper on fr4 pcb, in still air conditions with minimal lead connections only. (d) for a dual device surface mounted on 10 sq cm single sided 1oz copper on fr4 pcb, in still air conditions with all exposed pads attached attached . the copper area is split down the centre line into two separate areas with one half connected to each half of the dual device. (e) for a dual device surface mounted on 85 sq cm single sided 2oz copper on fr4 pcb, in still air conditions with all exposed pads attached attached . the copper area is split down the centre line into two separate areas with one half connected to each half of the dual device. (f) for a dual device with one active die. (g) for dual device with 2 active die running at equal power. (h) repetitive rating - pulse width limited by max junction temperature. refer to transient thermal impedance graph. (i) the minimum copper dimensions required for mounting are no smaller than the exposed metal pads on the base of the device as shown in the package dimensions data. the thermal resistance for a dual device mounted on 1.5mm thick fr4 board using minimum copper 1 oz weight, 1mm wide tracks and one half of the device active is rth = 250c/w giving a power rating of ptot = 500mw. parameter symbol limit unit collector-base voltage v cbo 40 v collector-emitter voltage v ceo 15 v emitter-base voltage v ebo 7.5 v peak pulse current i cm 15 a continuous collector current (a)(f) i c 4.5 a continuous collector current (b)(f) i c 5.0 a base current i b 1000 ma power dissipation at ta=25c (a)(f) linear derating factor p d 1.5 12 w mw/c power dissipation at ta=25c (b)(f) linear derating factor p d 2.45 19.6 w mw/c power dissipation at ta=25c (c)(f) linear derating factor p d 1 8 w mw/c power dissipation at ta=25c (d)(f) linear derating factor p d 1.13 9 w mw/c power dissipation at ta=25c (d)(g) linear derating factor p d 1.7 13.6 w mw/c power dissipation at ta=25c (e)(g) linear derating factor p d 3 24 w mw/c operating and storage temperature range t j :t stg -55 to +150 c absolute maximum ratings. obsolete - please use zxtd617mc
zxtdam832 issue 1 - june 2002 3 0.1 1 10 0.01 0.1 1 10 0 25 50 75 100 125 150 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 1m 10m 100m 1 10 100 1k 0 20 40 60 80 0.1 1 10 100 0 25 50 75 100 125 150 175 200 225 0.1 1 10 100 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 note (a)(f) 100us 100ms 1s v ce(sat) limited 1ms safe operating area single pulse, t amb =25c dc 10ms i c collector current (a) v ce collector-emitter voltage (v) 1oz cu note (d)(f) 1oz cu note (d)(g) 2oz cu note (a)(f) 2oz cu note (e)(g) derating curve t amb =25c max power dissipation (w) temperature (c) note (a)(f) d=0.2 d=0.5 d=0.1 transient thermal impedance single pulse d=0.05 thermal resistance (c/w) pulse width (s) 1oz copper note (g) 1oz copper note (f) 2oz copper note (f) 2oz copper note (g) thermal resistance v board area thermal resistance (c/w) boardcuarea(sqcm) 1oz copper note (g) 2oz copper note (g) 1oz copper note (f) 2oz copper note (f) power dissipation v board area t amb =25c t jmax =150c continuous p d dissipation (w) boardcuarea(sqcm) typical characteristics obsolete - please use zxtd617mc
zxtdam832 issue 1 - june 2002 4 parameter symbol min. typ. max. unit conditions. collector-base breakdown voltage v (br)cbo 40 70 v i c =100 a collector-emitter breakdown voltage v (br)ceo 15 18 v i c =10ma* emitter-base breakdown voltage v (br)ebo 7.5 8.2 v i e =100 a collector cut-off current i cbo 25 na v cb =32v emitter cut-off current i ebo 25 na v eb =6v collector emitter cut-off current i ces 25 na v ces =12v collector-emitter saturation voltage v ce(sat) 8 70 165 240 200 14 100 200 280 mv mv mv mv mv i c =0.1a, i b =10ma* i c =1a, i b =10ma* i c =3a, i b =50ma* i c =4.5a, i b =50ma* i c =4.5a, i b =100ma* base-emitter saturation voltage v be(sat) 0.94 1.00 v i c =4.5a, i b =50ma* base-emitter turn-on voltage v be(on) 0.88 0.95 v i c =4.5a, v ce =2v* static forward current transfer ratio h fe 200 300 200 150 415 450 320 240 80 i c =10ma, v ce =2v* i c =0.2a, v ce =2v* i c =3a, v ce =2v* i c =5a, v ce =2v* i c =12a, v ce =2v* transition frequency f t 80 120 mhz i c =50ma, v ce =10v f=100mhz output capacitance c obo 30 40 pf v cb =10v, f=1mhz turn-on time t (on) 120 ns v cc =10v, i c =1a i b1 =i b2 =10ma turn-off time t (off) 160 ns electrical characteristics (at t amb = 25c unless otherwise stated). *measured under pulsed conditions. pulse width=300 s. duty cycle 2% obsolete - please use zxtd617mc
zxtdam832 issue 1 - june 2002 5 1m 10m 100m 1 10 1m 10m 100m 1 1m 10m 100m 1 10 0.00 0.05 0.10 0.15 0.20 0.25 1m 10m 100m 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1m 10m 100m 1 10 0.2 0.4 0.6 0.8 1.0 0 90 180 270 360 450 540 630 v ce(sat) vi c tamb=25c i c /i b =100 i c /i b =50 i c /i b =10 v ce(sat) (v) i c collector current (a) v be(sat) vi c i c /i b =50 100c 25c -55c v ce(sat) (v) i c collector current (a) h fe vi c v ce =2v -55c 25c 100c normalised gain i c collector current (a) 25c v ce(sat) vi c i c /i b =50 100c -55c v be(sat) (v) i c collector current (a) v be(on) vi c v ce =2v 100c 25c -55c v be(on) (v) i c collector current (a) typical gain (h fe ) typical characteristics obsolete - please use zxtd617mc
zxtdam832 6 issue 1 - june 2002 europe zetex plc fields new road chadderton oldham, ol9 8np united kingdom telephone (44) 161 622 4422 fax: (44) 161 622 4420 uksales@zetex.com zetex gmbh streitfeldstra?e 19 d-81673 mnchen germany telefon: (49) 89 45 49 49 0 fax: (49) 89 45 49 49 49 europe.sales@zetex.com americas zetex inc 700 veterans memorial hwy hauppauge, ny11788 usa telephone: (631) 360 2222 fax: (631) 360 8222 usa.sales@zetex.com asia pacific zetex (asia) ltd 3701-04 metroplaza, tower 1 hing fong road kwai fong hong kong telephone: (852) 26100 611 fax: (852) 24250 494 asia.sales@zetex.com these offices are supported by agents and distributors in major countries world-wide. this publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. the company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. for the latest product information, log on to www.zetex.com ? zetex plc 2002 controlling dimensions in millimetres approx. converted dimensions in inches mlp832 package outline (3mm x 2mm micro leaded package) dim millimetres inches dim millimetres inches min. max. min. max. min. max. min. max. a 0.80 1.00 0.031 0.039 e 0.65 ref 0.0256 bsc a1 0.00 0.05 0.00 0.002 e 2.00 bsc 0.0787 bsc a2 0.65 0.75 0.0255 0.0295 e2 0.43 0.63 0.017 0.0249 a3 0.15 0.25 0.006 0.0098 e4 0.16 0.36 0.006 0.014 b 0.24 0.34 0.009 0.013 l 0.20 0.45 0.0078 0.0157 b1 0.17 0.30 0.0066 0.0118 l2 0.125 0.00 0.005 d 3.00 bsc 0.118 bsc r 0.075 bsc 0.0029 bsc d2 0.82 1.02 0.032 0.040 0 12 0 12 mlp832 package dimensions obsolete - please use zxtd617mc
|
